DAP 78425 White Alex Fast Dry Plus Silicone Fast drying and specifically formulated to meet the demanding needs of Professional Painters, delivering outstanding paint finish results. Is specifically formulated to meet the demanding needs of Professional Painters and deliver outstanding paint finish results. It can be brush painted in just 20 minutes after application or spray painted immediately, so the job gets finished faster. This durable, flexible caulk won’t crack or discolour paint and doesn’t pick up dirt. It has outstanding adhesion to a wide variety of surfaces, provides a 100% waterproof seal and cured caulk is mould and mildew resistant. It applies smoothly and easily. 50 Year.
Exceeds ASTM Specification C834. Interior/exterior use.
Features & Benefits
- Paint ready in 20 minutes
- Won’t shine through or discolor paint
- Resists cracking & chalking
- Exceeds ASTM C834
- Reduced dirt pick-up
- 50 year warranty
- 100% waterproof seal
- Cured caulk is mold & mildew resistant
- Easy water clean-up
- Low odor
- Interior/exterior use
Proper Surface Preparation is Key
Remove any old caulk from the seam or joint by cutting or scraping it away. Then clean the area with soap and water to remove dirt, dust, grease or debris. Rinse thoroughly. Make sure the area to be sealed is clean and dry to ensure good adhesion.
Want straight lines?
Apply painter’s masking tape to either side of the joint before applying the sealant. Remove the tape before the sealant skins over – about 2-5 minutes. To remove, lift the edge up at a 45° angle and pull away from you.
Get a Professional-Looking Finish
To get a professional-looking finish after the sealant has been applied, smooth the bead of sealant with a caulk finishing tool dipped in water. Do this before the sealant starts to skin over, about 2-5 minutes.
DAP 78425 White Alex Fast Dry Plus Silicone Material Safety Sheet
DAP 78425 White Alex Fast Dry Plus Silicone Technical Data Sheet
Related Products:
DAP 71164 946ml (Qt) Pink Drydex Spackling
