DAP 74853 White Kwik Seal White Kwik Seal Easy-to-use acrylic latex that bonds like a glue and seals like a caulk. It tools easily and provides a durable, mildew resistant, watertight seal with excellent adhesion and flexibility. is an easy-to-use acrylic latex that bonds like a
glue and seals like a caulk. Once cured, it is mould and mildew resistant and 100% waterproof seal.
It is easy to apply, paintable, low in odour and water clean-up. Interior use.
- 100% waterproof seal
- Mold & mildew resistant when cured
- Bonds like a glue, seals like a caulk
- Paintable
- Easy water clean-up
- Low odor
- Interior use
Key Features
- Cured caulk is mould & mildew resistant
- 100% waterproof seal
- Bonds like glue, seals like a caulk
- Paintable
- Easy water clean-up & low odour
- VOC compliant
- Interior use
USE FOR CAULKING & SEALING:
- Tubs
- Showers
- Sinks
- Backsplashes
- Vanities
- Countertops
- Fixtures
- Pipes
- Repairing loose tiles
ADHERES TO:
- Wood – painted & unpainted
- Ceramic
- Porcelain
- Glass
- Most metals
- Most plastics
- Drywall
- Plaster
- Brick
- Stone
- Most common building materials
Apply in temperatures above 4.4ºC.
- Not for continuous underwater use, high temperature surfaces or surface defects.
- Joint size should not exceed 9 mm (3/8”) wide x 9 mm (3/8”) deep. If joint depth exceeds 9 mm (3/8″),
use backer rod material. - Wait 36 hours before exposing to water.
- Store caulk away from extreme heat or cold.
Surface Preparation
Surface must be clean, dry, structurally sound and free of all old caulk, dirt and other foreign material. Rubbing
alcohol (Isopropyl alcohol) is recommended for removing soap film and soil.
Product Application
1. If using the squeeze tube, remove cap.
2. Cut nozzle at 45º angle to desired bead size.
3. If using the cartridge, load into caulk gun.
4. Fill gap or joint with caulk.
5. If necessary, tool or smooth the bead of caulk with a finishing tool before caulk skins over.
6. Clean up excess wet caulk with a damp sponge before it skins over. Excess dried caulk must be cut or
scraped away. Clean hands and tools with warm water and soap.
7. Allow caulk to dry at least 2 hours (longer in cool/humid conditions) before painting with latex or oilbased paints.
8. Wait 36 hours before exposing to water.
9. Reseal container for storage and reuse.
Typical Uncured Physical Properties | |
Appearance/Consistency | Gunnable, non-sag paste |
Base Polymer | Siliconized acrylic polymer |
Filler | Not applicable |
Volatile | Water |
Weight % Solids | 78% |
Density (lbs per gallon) | 12.6 |
Odour | Very Mild |
Clean Up | Water |
Flash Point | >100ºC |
Freeze Thaw Stability (ASTM C1183) | Passes 5 cycles |
Shelf Life | 12 months |
Coverage | 300 ml (10.1 fl oz): 17 linear meters (55 linear feet) at a 5 mm (3/16″) diameter bead 162 ml (5.5 fl oz): 9 linear meters (30 linear feet) at a 5 mm (3/16”) diameter bead |
Typical Application Properties | |
Application Temperature Range | 4.4ºC to 37ºC |
Tooling Time (Working Time) | 60 minutes |
Tack Free Time | 60 minutes |
Full Dry Through | 36 hours |
Return to Service Time | 36 hours |
Vertical Sag (ASTM D2202) | 1 mm (0.05”) |
Typical Cured Performance Properties | |
Service Temperature Range | -29ºC to 82ºC |
Water Ready Time | 36 hours |
Paint Ready Time | 2 hours |
Mildew Resistance | Cured caulk is mould & mildew resistant |
Clean up excess wet caulk with a damp sponge before it skins over. Excess dried caulk must be cut or scraped
away. Clean hands and tools with warm water and soap. Store container in a cool, dry place away from extreme
heat or cold.
DAP 74853 White Kwik Seal White Kwik Seal Material Safety Data Sheet 1
DAP 74853 White Kwik Seal White Kwik Seal Material Safety Data Sheet 2
DAP 74853 White Kwik Seal White Kwik Seal Material Safety Data Sheet 3
DAP 74853 White Kwik Seal White Kwik Seal Specification Sheet
Related Products:
Dap 74270 300ml (10 oz.) Alex Plus White